Building on the award winning, tried and tested Rear Mudhugger
design, we have now added 3 signficant improvemnts over the original
2012 Rear Mudhugger design.
1. Utilising reusable quick release velcro straps to fit to the
helitape protected seat stays makes fitting and removing a matter of
seconds.
2. Where the Mudhugger 'sits' on the seat stays we have incorporated rubber inserts which aid grip and improves damping.
3. An all new push fit BB extender. Designed to protect bearings and
the BB area from mud and debris build up, in even the most extreme
conditions. This has been designed to be as thin as possible so that it
can be easily trimmed to suit most bike rear triangle designs*.
The MEDIUM version is designed for bikes with a seat stay angle from
34 degrees down to 27 degrees. Can be fitted to 'most' mountain bikes
with disc brakes, even with external cables and hoses.
Length - 690mm.
Width - 105mm.
BB Extension - 230mm long x 80mm wide
Weight - 280g excluding fittings.
MEDIUM MK2 Rear Mudhugger comes supplied with:
2 x helitape sheets to protect seat stays.
4 x reusable velcro straps - spares available - click here
2 x rubber damping strips - spares available - click here
1 x BB etension piece - spares available - click here
Fitting instructions.
We recommend that you periodically check the condition of the
helitape for signs of wear. Spare packs of Helitape are available on the
Mudhugger website. Replace as necessary.
PLEASE ENSURE YOU USE THE HELITAPE PROVIDED WITH THE REAR MUDHUGGERS,
INVISIFRAME AND ELECTRICAL TAPE ARE NOT SUFFICIENT TO PROTECT YOUR
BIKES PAINT AND FRAME. REGULARLY CHECK THE HELITAPE FOR SIGNS OF WEAR
AND THE TIGHTNESS OF THE ZIPTIES (if used).
Regularly check the velcro for build up of dirt etc, wash and dry as
required. Replace if any signs of tearing or the velcro hook and loop
becomes worn and loses its stickiness. Spare Velcro straps are availbale
on the Mudhugger website. Zipties can also be used to fit the Mk2 Rear
Mudhugger to your bike if you should so choose.
*If your seat stay brace is located very close to the tyre, you may
not be able to utilise the BB extender. If you're unsure email us a
photo of this area of your bike on sales@themudhugger.co.uk